ST “Energomera” type hinged telecommunication cabinet

• Complies with GOST 28601-90
• Complies with GOST 14254-96
• Complies with GOST 12.2.007.0-75

Design.
For wall mounting there are 4 holes for anchor bolt (8 mm in diameter) in the back wall of the cabinet.
For equipment installation 19" profiles with 8x8 mm square perforation providing installation and mounting of the equipment and accessories are applied.
There are marks complying with 1U rate on the front side of the profiles near perforation.
Nominal admissible load – up to 100 kg.

Equipment access.
The door has a single-point fixation lock. Opens both to the right and left sides. Is made of metal framed heat-treated shock-resistant tinted glass (protection class not lower than IP 20).
Removable side panels, fixed in the frame by single-point fixation locks.
Back panel of the cabinets is in the form of case section, its size is 1/5 of cabinet size, with sideway opening for inside easy mounting. Hinges may be installed both at the left and the right side.

Ventilation and climate control.
Cabinet base perforation provides internal ventilation. There are holes in the upper base for inlet and exhaust ventilation units.

Cable inlets.
There is brush cable inlet in the upper base of the cabinet. Additional break out gags for cable inlet 46x15 mm in size.

Earthing.
Is performed by an earthing element connecting an external earthing copper conductor with not less than 4 mm cross section with copper earthing bus providing connection of potential equalizing conductors.

Coverage.
Powder polyester paint, RAL-7035 or other colour at the customer’s request. All unpainted metal surfaces have zinc protection cover.

Cabinet design provides easy maintenance and equipment installation.

• Average service life: not less than 25 years.