PRODUCTS CONTACTS SERVICE
add favorite JSC "Concern Energomera"Sate mapconcern@energomera.runews@energomera.ru
 RU  |  PL
ABOUT COMPANY INVESTORS TRAINING EXHIBITIONS & SEMINARS SERVICE PRODUCTS

» Telecommunication cabinets

» ST "Energomera" line hinged cabinet

» ST "Energomera" line floor cabinet

» ST2H line floor cabinet

» 19" Floor cabinet series ST2HE

» Vandal-proof cabinet series ST2V

.: ENERGOMERA TM
    PRODUCTS

» Electricity meters

» Automatic Meter Reading Systems

» Switchboards

» Low Voltage Products

» Verification (Calibration) sets

» Electrochemical Protection Equipment

 

ST “ENERGOMERA” LINE FLOOR TELECOMMUNICATION CABINET

 
ST “ENERGOMERA” LINE FLOOR TELECOMMUNICATION CABINET - ST2H line floor cabinet

ST2H line floor cabinet

Multi-purpose 19" telecommunication cabinet is intended for cable, commutation, server and computer equipment siting.
Cabinet complies with supporting constructions system of 482,6 mm (19") series with dimensions ratio according to U height (1 U = 44,45 mm).
 
  Standard compliance
 
  • Complies with GOST 28601-90
  • Complies with GOST 14254-96
  • Complies with GOST 12.2.007.0-75
  Parameters and characteristics
 

Frame: demountable, bearing, universal, for side easy detachable panels, front and back doors mounting.

Nominal admissible load - up to 300 kg.

Front single swing door: opens to the right and left sides with opening angle not less than 180°. Has three-point fixation lock. There are the following door modifications:

  • blind, made of steel sheet;
  • blind, made of steel sheet with perforation;
  • made of metal framed shock-resistant tinted glass.

Back single swing door: opens to the right and left sides with opening angle not less than 95°. Has single-point fixation lock (locks). There are different door modifications supplied at the customer’s request.

Side panels: removable, fixed in frame with the help of single-point fixation locks.

Lower base: with elements of bearing racks mounting, adjustable prop-feet or footstall. There are 380X380 mm holes (break out elements) for inlet ventilation unit installation, and also 46X215 mm hole for cable inlet.

Upper base: has 46X215 mm hole (break out elements) for cable inlet installation and 380X380 mm hole for exhaust ventilation unit installation.

Ventilation roof. Modifications:

  • with IP41 protection level in cabinet mounting operational position;
  • with IP31 protection level with side perforation for natural ventilation;
  • with IP20 protection level with brush cable inlets;
  • with IP20 protection level with perforation for cabinet exhauster fans or ventilation units installation;
  • other modifications supplied at the customer’s request.

Footstall: removable, 100 or 200 mm height, with level adjustment possibility. May have brush cable inlets or cable inlet punching, perforation for cabinet natural ventilation.

Cabinets without footstall: installation on adjustable props (feet) or roll props.

Earthing element: for connection of external earthing copper conductor with not less than 6 mm cross-section.

Copper earthing bus: provides equalizing potentials conductors connection.

Cover: powder polyester paint, RAL-9005, RAL-7035 or other colour at the customer’s request. All cabinet unpainted metal surfaces have zinc or other galvanic cover.

  Reliability characteristics
 
  • Average service life: not less than 25 years.
 
  The cabinets can be provided with necessary accessories and additional component parts for equipment mounting, wiring arrangement, cable commutation, etc.
 
  Accessories PDF 96 kB
  Modifications
 
Cabinet overall dimensions
Width, mm Depth, mm Height, U
600, 800 600, 800, 1000 22, 24, 28, 32, 36, 40, 42
Go top
ABOUT COMPANY NEWS TRAINING PUBLICATIONS IN MASS MEDIA SERVICE PRODUCTS
© 2001-2010 Concern Energomera JSC